Energy harvesting based two-way full-duplex relaying network over a Rician fading environment: performance analysis

Full-duplex transmission is a promising technique to enhance the capacity of communication systems. In this paper, we propose and investigate the system performance of an energy harvesting based two-way full-duplex relaying network over a Rician fading environment. Firstly, we analyse and demonstrate the analytical expressions of the achievable throughput, outage probability, optimal time switching factor, and symbol error ratio of the proposed system. In the second step, the effect of various parameters of the system on its performance is presented and investigated. In the final step, the analytical results are also demonstrated by Monte Carlo simulation. The numerical results proved that the analytical results and the simulation results agreed with each other.Web of Science68112311

Multisource power splitting energy harvesting relaying network in half-duplex system over block Rayleigh fading channel: System performance analysis

Energy harvesting and information transferring simultaneously by radio frequency (RF) is considered as the novel solution for green-energy wireless communications. From that point of view, the system performance (SP) analysis of multisource power splitting (PS) energy harvesting (EH) relaying network (RN) over block Rayleigh-fading channels is presented and investigated. We investigate the system in both delay-tolerant transmission (DTT), and delay-limited transmission (DLT) modes and devices work in the half-duplex (HD) system. In this model system, the closed-form (CF) expressions for the outage probability (OP), system throughput (ST) in DLT mode and for ergodic capacity (EC) for DTT mode are analyzed and derived, respectively. Furthermore, CF expression for the symbol errors ratio (SER) is demonstrated. Then, the optimal PS factor is investigated. Finally, a Monte Carlo simulation is used for validating the analytical expressions concerning with all system parameters (SP).Web of Science81art. no. 6

Computation Offloading and Resource Allocation for Backhaul Limited Cooperative MEC Systems

In this paper, we jointly optimize computation offloading and resource allocation to minimize the weighted sum of energy consumption of all mobile users in a backhaul limited cooperative MEC system with multiple fog servers. Considering the partial offloading strategy and TDMA transmission at each base station, the underlying optimization problem with constraints on maximum task latency and limited computation resource at mobile users and fog servers is non-convex. We propose to convexify the problem exploiting the relationship among some optimization variables from which an optimal algorithm is proposed to solve the resulting problem. We then present numerical results to demonstrate the significant gains of our proposed design compared to conventional designs without exploiting cooperation among fog servers and a greedy algorithm

ASEAN- Australia Trade Relations by Stages of Processing: Comparative Research

ASEAN and Australia became the dialogue partner in 1974. Over 46 years of cooperation and development, ASEAN- Australia relations have achieved many good results, especially in recent years when two sides participate in several free trade agreements (FTAs) at bilateral levels and multilateral levels. In 2014, Australia and ASEAN formally became strategic partners, recognizing the importance of the relationship in building mutual benefits. Participation in FTAs and relationship upgrading has helped bilateral trade growth. In 2018-2019, Australia was the seventh-largest trading partner of ASEAN and ASEAN was one of Australia's top three trading partner, however, the two sides face many challenges such as the difficulties after the global crisis since 2009, the "spaghetti bowl" phenomenon of joining many agreements at the same time. Thus, to solve these problems, the production and exporting of comparative advantage goods by the stages of processing to participate in an ideal regional supply chain are very important. Based on the comparative theory and supply chain perspectives The paper compared revealed comparative advantage indexes of ASEAN countries and Australia from 2009 through 2018 to find which country in ASEAN is Australia's suitable partner from which provided the ideal effective supply chain distribution. After that, through trade value comparison, the paper examed if ASEAN countries and Australia specialized in production by stages of processing. From the results, appropriate recommendations were provided to enhance the trade relations between ASEAN and Australia

Power beacon-assisted energy harvesting in a half-duplex communication network under co-channel interference over a Rayleigh fading environment: Energy efficiency and outage probability analysis

In this time, energy efficiency (EE), measured in bits per Watt, has been considered as an important emerging metric in energy-constrained wireless communication networks because of their energy shortage. In this paper, we investigate power beacon assisted (PB) energy harvesting (EH) in half-duplex (HD) communication network under co-channel Interferer over Rayleigh fading environment. In this work, we investigate the model system with the time switching (TS) protocol. Firstly, the exact and asymptotic form expressions of the outage probability (OP) are analyzed and derived. Then the system EE is investigated and the influence of the primary system parameters on the system performance. Finally, we verify the correctness of the analytical expressions using Monte Carlo simulation. Finally, we can state that the simulation and analytical results are the same.Web of Science1213art. no. 257

Hybrid decode-amplify and forward protocol of FD EH relaying network: outage probability analysis

Nowadays, many research papers focus on the WPCN problem and how to improve its efficiency. In this research, we propose and investigate Hybrid Decode-Amplify and Forward Protocol (HDAF) of the Full-Duplex (FD) Energy Harvesting (EH) Relaying Network with the Time Switching (TS) protocol. In the beginning stage, we present the HDAF mode, which can be work like a Decode-and-Amplify (DF) or Amplify-and-Forward (AF) modes based on the best of its performance in the FD EH relaying network. Furthermore, the closed-form expression of the outage probability (OT) is analyzed and derived in connection with the primary system parameters. Besides, the comparison of the system performance in the AF, DF, and HDAF is proposed and investigated. Finally, all the results are convinced by the Monte Carlo simulation for all cases

Nanocomposite Thin Film TiO2/CdS Electrodes Prepared by Thermal Evaporation Process for Photovoltaic Applications

The incorporation of cadmium sulfide (CdS) into TiO2 nanoparticle thin films was investigated. The nanoparticle TiO2 thin film onto an indium doped–tin oxide (ITO) substrate was deposited by Electron Beam Deposition (EBD) combined with thermal process. Then a CdS thin film was vacuum-deposited onto the pre-deposited TiO2 film by a thermal evaporation technique. The obtained TiO2/CdS was characterized by X-ray diffraction (XRD), field emission scanning electron microscope (FE-SEM). The TiO2/CdS nanocomposite film was used in a photo-electrochemical (PEC) cell as a working electrode and a platinum electrode as a counter electrode. The electrolyte solution contains 1 M KCl and 0.1M Na2S. The results show that the cell with TiO2/CdS composite film electrode has significantly improved photoelectric capability in comparison with that of the pure TiO2 thin films

Hydrothermal Synthesis and Enhanced Photocatalytic Activity of TiO2_{2}-Fe@CNTs Nanocomposite for Methylene Blue Degradation under Visible Light Irradiation

TiO2 is one of the most attractive metal oxides because of the excellent chemical and photocatalytic properties. However, a problem in the application of TiO2 is the large band gap energy of 3.2 eV, corresponding to its photocatalytic activity under UV-light irradiation of wavelengths 387 nm. In this work, TiO2 nanoparticles doped with iron were grown on the surface of functionalized carbon nanotubes (TiO2-Fe@CNTs) to expand the photoabsorbance of the nanocomposite materials in the visible light region and improve their photocatalytic activity. TiO2-Fe@CNTs nanocomposite materials were synthesized by hydrothermal route in Teflon-sealed autoclave at 180oC for 10h. The FE-SEM and X-Ray diffraction measurements were taken for morphology and structural analysis of TiO2 nanoparticles doped with Fe coating on CNTs. The effects of the iron and CNTs on the enhanced photocatalytic activity for methylene blue degradation under AM 1.5 illumination of 100 mW.cm−2 were investigated

Graphene Effect on Efficiency of TiO2-based Dye Sensitized Solar Cells (DSSC)

Colloidal paste of TiO2 embedded with graphene (GS) was fabricated and used to spread TiO$_2$ film photo-electrode of DSSC solar cells. The dye N179 and Iodine-based electrolyte were used in the DSSC solar cells. Raman scattering, SEM images were used to identify the material phases and microstructure of the film photo-electrode. I/V characteristics of the DSSC cells were recorded at room temperature. Open-circuit voltage Voc, short-current $J_{sc}$ and efficiency η of the DSSC cells were estimated. It shows that graphene addition has affected on $V_{oc}$,$J_{sc}$ and $\eta$. The $V_{oc}$,$J_{sc}$ and $\eta$ abnormally depend on graphene content. The efficiency reached a maximal value with graphen concentration of 0.005 wt %, after that decreased. It is supposed to be related with an improving the charge transfer in the working photo-electrode of DSSC